Southern California Repipe Specialists
Whole House Repipe Company for Uponor PEX A and Type L Copper
SoCal Repipes replaces aging, leaking and corroded hot and cold water lines with professionally planned PEX A or copper repiping.
- Uponor PEX A
- Type L Copper
- Clear Written Scope
- Wall Patching Options
Local Repipe Specialists for Aging and Leaking Pipes
Repeated water leaks, low water pressure, rusty water and aging piping can indicate a system-wide problem. Our repipe specialists evaluate the property, plan practical pipe routes and explain whether a whole house repipe is appropriate.
Repipe Company
Plan and replace aging hot and cold water distribution lines throughout the home.
Repipe Contractors
Coordinate pipe routes, access locations, fixture connections, testing and project cleanup.
Repipe Plumbing
Choose between Uponor PEX A and Type L copper based on the property and written scope.
When a Whole House Repipe Is Needed
A full repipe may be more practical than continuing to repair individual sections when problems affect the plumbing system throughout the property. The condition of the existing pipes, repair history, water pressure and pipe material should all be evaluated before work is recommended.
Repeated Pipe Leaks
Multiple failures can indicate that other sections of the existing piping may also be deteriorating.
Low Water Pressure
Corrosion, mineral buildup and undersized water lines can restrict flow at multiple fixtures.
Old Pipe Materials
Aging galvanized, polybutylene or deteriorated copper piping may justify full replacement.
Rusty or Discolored Water
Internal corrosion and mineral buildup can affect water appearance, taste and flow at fixtures.
Repeated Spot Repairs
Several repairs in different areas can indicate that the remaining water lines are approaching the same condition.
Uponor PEX A and Type L Copper Repipe Options
The right material depends on the property, pipe routes, exposure, water conditions, budget and the final written scope.
| Repipe Material | Potential Advantages | Important Planning Details |
|---|---|---|
| Uponor PEX A | Flexible routing, corrosion resistance and fewer directional fittings in many layouts. | Must be supported correctly and protected from ultraviolet exposure and physical damage. |
| Type L Copper | Rigid metallic piping with a long history of residential and commercial use. | Water chemistry, routing, accessibility, labor and material costs should be evaluated. |
Typical Whole House PEX A Repipe Scope
Every property is different. The signed proposal controls the final fixture count, access requirements, included repairs and project scope.
Included Work
- Begin at the existing cold water main attached to the building
- Install new hot and cold Uponor PEX A water lines
- Use Type L copper where piping is exposed to ultraviolet light
- Support and secure new piping along approved routes
- Seal required penetrations with appropriate materials
- Connect the fixtures and equipment listed in the written proposal
- Pressure test the completed water distribution system
- Abandon replaced hot and cold piping in place where applicable
Project-Specific Details
- Meter-to-house water main work is excluded unless listed
- Fixture quantities and connections must be confirmed
- Wall and ceiling access locations depend on the property
- Drywall, texture, stucco and painting must be listed in writing
- Permit fees and additional city requirements may be separate
- Tile, stone, cabinets and finish flooring are excluded unless listed
- Concealed conditions are reviewed if discovered during work
- The signed proposal controls the final project scope
How Does a Whole House Repipe Work?
A whole house repipe replaces the existing hot and cold water distribution lines with a newly planned piping system. The work is organized around the property layout, fixture locations, selected material and the access openings needed to reach each connection.
Inspect the Existing System
Review the pipe material, leak history, water pressure, fixture count and access conditions.
Choose the Material and Routes
Select Uponor PEX A or Type L copper and plan practical routes through walls, ceilings, attic or crawl areas.
Create Required Access
Make controlled openings only where needed to route new piping and reach the listed fixture connections.
Install and Reconnect
Install supported hot and cold water lines, reconnect the fixtures included in the proposal and abandon replaced piping where applicable.
Pressure Test the System
Test the completed water lines, verify the listed connections and restore water service after the installation is confirmed.
What Happens to Walls and Ceilings?
Small access openings are made where needed to route piping and complete connections. Drywall patching, texture, stucco and painting are included only when they are specifically listed in the written proposal. The advertised two bathroom PEX A special includes wall patching and texture.
What Happens After the Repipe Is Completed?
The new system is tested for proper operation and leak-free connections. Replaced water lines are abandoned where applicable, water service is restored and the access repairs included in the written scope are completed.
Many standard residential installations can be completed within one to two working days, but the exact schedule depends on the home size, fixture count, accessibility, inspections, selected material and included repairs. Read the complete guide explaining how a whole house repipe works.
Whole House Repipe Service Across Southern California
SoCal Repipes provides PEX A and copper repiping for homeowners and property owners throughout Southern California. Property access, fixture count and the final service area are confirmed when the estimate is scheduled.
Orange and Los Angeles Counties
Whole house PEX A and Type L copper repiping for aging, leaking and corroded water lines.
Riverside and San Bernardino Counties
Repipe planning for single-family homes, multifamily properties and buildings with recurring water-line failures.
San Diego and Ventura Counties
Professional repipe evaluations with material options, planned pipe routes and a clear written scope.
Whole House Repiping Questions
How much does a whole house repipe cost?
Pricing depends on the home size, fixture count, number of floors, pipe material, accessibility, wall repairs and local requirements. Review our whole house repipe cost guide.
Should I choose PEX A or copper?
Both can be suitable when properly designed and installed. Compare flexibility, exposure, water conditions, labor, material cost and homeowner preference. Read our PEX versus copper guide.
What happens during a whole house repipe?
The project normally includes inspection, route planning, access openings, new piping, fixture connections, testing and the repairs specifically listed in the written proposal. See how a whole house repipe works.
Are wall repairs included?
Wall patching, texture, stucco and painting should be clearly identified in the written proposal. The advertised two bathroom PEX A special includes patching and texture, while permits are additional.
How long does a whole house repipe take?
Many standard residential repipe installations can be completed within one to two working days. The exact schedule depends on the property size, fixture count, accessibility, material, inspections and the repairs included in the written proposal.
Explore Repipe Services and Resources
Learn more about repipe materials, project costs and what to expect before requesting your written estimate.
Request Your Whole House Repipe Quote
Call (855) 762-2573 or send SoCal Repipes your project information online to schedule an in-home evaluation.
